Hekate 6.0.1 + Nyx 1.5.1

 
Discutez ici des publications de notre portail. N'hésitez pas à poster vos remarques, commentaires, voire corrections si vous l'estimez nécessaire.
 
Répondre
Avatar du membre
newsbot
Réactions :
Messages : 835
Enregistré le : 21 avr.avr. 2019, 10:57
Localisation : au chaud sur le serveur
Contact :

Hekate 6.0.1 + Nyx 1.5.1

Message par newsbot » 22 déc.déc. 2022, 18:47


CTCaer propose un correctif rapide suite à la sortie de la dernière mise à jour, qui était affectée de bugs au niveau du loader L4T (un peu ballot vu que c'était la grande nouveauté). Le tir a été corrigé, quand bien même elle ne servira pas franchement à grand chose pour l'instant, puisque les distributions Linux, à priori, ne tirent pas encore partie de ce nouveau loader.


 
↓ Nouveautés / Corrections (cliquer pour voir) ↓'
Supports booting ALL current CFWs, Android/Linux booting and payload tools.
No more SD card removals
Supports: Erista (T210) and Mariko (T210B01) units
Latest HOS supported: 15.0.1
hekate v6.0.0/6.0.1 changes
  • L4T Loader
    Mandatory for new L4T releases and especially for Mariko support.
    Coreboot is no more (Still supported until everything gets updated though).
  • R2P for Mariko. Will be used by L4T.
  • Auto HOS power off will blink 3 times on OLED panels now
    The previous method of slow fade out doesn't work on OLED panels, so blink instead.
  • Changed battery enough limits
    Increased by 50-100mV. As always if you see the hekate battery empty icon, charge your switch, otherwise it can easily randomly shut off.
  • Various improvements/fixes
  • Hotfix 6.0.1 - L4T Loader:
    Fixed an issue with some FW data not propagating on T210B01.
    Fixed an issue with passing incorrect number of mtc tables on T210.
Nyx v1.5.0/1.5.1 Changes
  • Fixed an issue where UMS eMMC mount could hang
  • Added no border and colorized combo for launch options
    Icons must have the _hue_nobox.bmp suffix to enable that
  • Name the vendor of the new dram chips. Models still unknown.
  • Make all backup/restore options to always use 4 MB for BOOT0/1 partitions
    Adds better compatibility with custom eMMCs that have bigger boot partitions
  • Added 17 burnt fuses info missing from previous update
  • Added more SD vendors
  • 1.5.1: Fixed an issue where the transition from hekate logo to Nyx could be jarring on some LCD panels.
  • Various improvements/fixes
 

 
GitHub

Source : https://hackintendo.com/hekate-6-0-1-nyx-1-5-1/
Je suis le petit robot de hackintendo. Je récupère inlassablement les news du site pour qu'on puisse en discuter tranquillement sur le forum.
Répondre