Atmosphère 1.6.2

[newsbot]

La nouvelle version stable d'Atmosphère vient d'arriver. Depuis la pre-release 1.6.1, sciresM a modifié légèrement erpt, jpegdec et pm pour se calquer sur le fonctionnement officiel de ces modules. Dans la foulée, nx-hbmenu a également subi un petit lifting. Contrairement à l'arrivée du firmware 17.0.0 sous Atmosphère 1.6.0, qui avait nécessité un gros travail de fond sur les sigpatches, la présente version a été adaptée dans la foulée et est donc pleinement fonctionnelle, dès à présent.

 

↓ Nouveautés / Corrections (cliquer pour voir) ↓'

1.6.2 is Atmosphère's seventy-seventh official release.
Please be sure to update fusee when upgrading to 1.6.2. fusee-primary no longer exists, and will not work any more.
With thanks to the @switchbrew team, Atmosphère 1.6.2 is bundled with hbl 2.4.4, and hbmenu 3.6.0.
The following was changed since the last release:

• Support was finished for 17.0.0.
  
  • erpt was updated to support the latest official behavior.
    
  • jpegdec was updated to support the latest official behavior.
    
  • pm was updated to support the latest official behavior.
    
  
  
• General system stability improvements to enhance the user's experience.
  

And the following was changed in 1.6.1:

• An improved solution to the problem that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0 was added.
  
  • In particular, booting atmosphère will now automatically detect the problem and unbrick any consoles which have fallen into this state.
    
  
  
• Some improvements were made to haze, including:
  
  • Performance was greatly improved:
    
    • Support was added for GetObjectPropList, which decreases the amount of requests made by ~8x.
      
    • Haze now performs rendering on the GPU, freeing up the CPU to respond to requests in a more timely manner.
      
    
    
  • An issue was fixed with how haze configures bMaxPacketSize0 which improves support for USB3.
    
  
  
• General system stability improvements to enhance the user's experience.
  

And the following was changed in 1.6.0:

• Basic support was added for 17.0.0.
  
  • The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
    
    • There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosphère update.
      
    
    
  • exosphère was updated to reflect the latest official secure monitor behavior.
    
  • mesosphère was updated to reflect the latest official kernel behavior.
    
  • ncm was updated to reflect the latest official behavior.
    
  • erpt was partially updated to support the latest official behavior.
    
  
  
• Atmosphere's gdbstub now supports waiting to attach to a specific program id on launch (as opposed to any application).
  
  • The monitor command for this is monitor wait , where program id can optionally have an 0x prefix.
    
  
  
• Support was added to haze for editing files in-place and performing 64-bit transfers (files larger than 4 GB).
  
• bpc.mitm was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
  
  • This should cause the console to no longer wake ~15 seconds after shutdown on Mariko.
    
  
  
• A number of minor issues were fixed and improvements were made, including:
  
  • A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0.
    
  
  
• General system stability improvements to enhance the user's experience.
  

For information on the featureset supported by 1.6, please see the official release notes.

 

 

 

 
Github

Source : https://hackintendo.com/atmosphere-1-6-2/