Hekate 5.7.0 + Nyx 1.2.0

 
Discutez ici des publications de notre portail. N'hésitez pas à poster vos remarques, commentaires, voire corrections si vous l'estimez nécessaire.
 
Répondre
Avatar du membre
newsbot
Réactions :
Messages : 843
Enregistré le : 21 avr.avr. 2019, 10:57
Localisation : au chaud sur le serveur
Contact :

Hekate 5.7.0 + Nyx 1.2.0

Message par newsbot » 20 janv.janv. 2022, 17:32


L'arrivée d'une nouvelle version d'Atmosphère est toujours l'occasion de voir une mise à jour de Hekate, qui s'adapte au nouveau firmware 13.2.1. CTCaer en a profité pour améliorer de nombreuses choses, notamment les temps de démarrage (aussi bien de Hekate, de Nyx, des payloads ou d'Atmosphère !) ou bien encore le support du modèle OLED.

 

 
↓ Nouveautés / Corrections (cliquer pour voir) ↓
Supports booting ALL current CFWs, Android/Linux booting and payload tools.
No more SD card removals
Supports: Erista and Mariko units
Latest HOS supported: 13.2.1
Changes in this version
  • HOS 13.2.1 Support
  • Significantly improve HOS total boot speed
    In all modes. (Total varies with mode)
  • Improve hekate init speed
    That also helps with users that have faulty SD readers, as it will show TUI with error faster.
  • Improve payload launching speed
  • Significantly improve speed and heap pressure when parsing hekate ini configs
  • Significantly improve speed and heap pressure when parsing external kip patches
  • Add automatic L4T Linux/Android kernel panic dumps
    Needs new kernel that uses the L4T panic magic flag
  • Improve panic/exception error reporting
  • Various other improvements and fixes
Notice about Atmosphere 1.0.0 and up: The fss0=atmosphere/fusee-secondary.bin in hekate_ipl.ini must be changed to fss0=atmosphere/package3. And make sure that atmosphere/contents folder does not have old Atmosphere components.
Notice about resized emuMMC: Resized emuMMC does not have the slow bug anymore. You can create a new one or recreate it via Nyx and the issue will be gone.
Nyx v1.2.0 Changes
  • eMMC lower bus speed init support when init fails
    User will be notified on Nyx boot if eMMC is initialized in lower bus speed or in eMMC if that is true or if read/write errors happened
    eMMC hw issue reporting also added to inform user in such cases
  • Support OLED's 64GB when creating FULL partition based emuMMC
    That's ofc a waste of space if selected, so it's better to use resized emuMMC
  • Highlight battery temperature when it's cold or hot.
    In these states, charger chip disabled charging.
  • Fix missing set of attributes when restoring folders in partition manager
 

 
GitHub

Source : https://hackintendo.com/hekate-5-7-0-nyx-1-2-0/
Je suis le petit robot de hackintendo. Je récupère inlassablement les news du site pour qu'on puisse en discuter tranquillement sur le forum.
Répondre