sciresM propose une seconde pre-release de son Custom Firmware Atmosphere, qui corrige le souci qui se présente lorsque l'on a reconstruit la partition SYSTEM (le firmware 17.0.0 bricke littéralement la console si tel est le cas). Atmosphère est capable de détecter la chose et débricker automatiquement la console, ce qui évitera des sueurs froides aux utilisateurs. Haze profite également d'améliorations substantielles.
Nota : tant que l'ensemble des éléments ne seront pas tous à jour (notamment les sigpatches), Hackintendo n'hébergera pas la dernière version d'Atmosphère, pour éviter tout souci. Ni Atmosphère 1.6.x, ni le firmware 17.0.0 ne sont pour l'heure nécessaires en quoi que ce soit. Il n'est absolument pas obligatoire d'upgrader pour le moment.
↓ Nouveautés / Corrections (cliquer pour voir) ↓'
1.6.1 is Atmosphère's seventy-sixth official release.
Please be sure to update fusee when upgrading to 1.6.1. fusee-primary no longer exists, and will not work any more.
Please note: Atmosphère 1.6.1 is currently in pre-release, and issues may be found that need to be fixed before full release.
The following was changed since the last release:
1.6.0 is Atmosphère's seventy-fifth official release.
Please be sure to update fusee when upgrading to 1.6.0. fusee-primary no longer exists, and will not work any more.
Please note: Atmosphère 1.6.0 is currently in pre-release, and issues may be found that need to be fixed before full release.
The following was changed since the last release:
Please be sure to update fusee when upgrading to 1.6.1. fusee-primary no longer exists, and will not work any more.
Please note: Atmosphère 1.6.1 is currently in pre-release, and issues may be found that need to be fixed before full release.
- If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
- 1.6.1 will transition to release after a short amount of time has passed without pressing bug reports.
The following was changed since the last release:
- An improved solution to the problem that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0 was added.
- In particular, booting atmosphère will now automatically detect the problem and unbrick any consoles which have fallen into this state.
- In particular, booting atmosphère will now automatically detect the problem and unbrick any consoles which have fallen into this state.
- Some improvements were made to haze, including:
- Performance was greatly improved:
- Support was added for GetObjectPropList, which decreases the amount of requests made by ~8x.
- Haze now performs rendering on the GPU, freeing up the CPU to respond to requests in a more timely manner.
- Support was added for GetObjectPropList, which decreases the amount of requests made by ~8x.
- An issue was fixed with how haze configures bMaxPacketSize0 which improves support for USB3.
- Performance was greatly improved:
- General system stability improvements to enhance the user's experience.
1.6.0 is Atmosphère's seventy-fifth official release.
Please be sure to update fusee when upgrading to 1.6.0. fusee-primary no longer exists, and will not work any more.
Please note: Atmosphère 1.6.0 is currently in pre-release, and issues may be found that need to be fixed before full release.
- If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
- 1.6.0 will transition to release after a short amount of time has passed without pressing bug reports.
The following was changed since the last release:
- Basic support was added for 17.0.0.
- The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
- There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosphère update.
- There shouldn't be anything user visible resulting from this, but it will be addressed in a soon-to-come atmosphère update.
- exosphère was updated to reflect the latest official secure monitor behavior.
- mesosphère was updated to reflect the latest official kernel behavior.
- ncm was updated to reflect the latest official behavior.
- erpt was partially updated to support the latest official behavior.
- The console should boot and atmosphère should be fully functional. However, not all modules have been fully updated to reflect the latest changes.
- Atmosphere's gdbstub now supports waiting to attach to a specific program id on launch (as opposed to any application).
- The monitor command for this is monitor wait , where program id can optionally have an 0x prefix.
- The monitor command for this is monitor wait , where program id can optionally have an 0x prefix.
- Support was added to haze for editing files in-place and performing 64-bit transfers (files larger than 4 GB).
- bpc.mitm was enabled on Mariko units, and now triggers pmic-based shutdowns/reboots (thanks @CTCaer).
- This should cause the console to no longer wake ~15 seconds after shutdown on Mariko.
- This should cause the console to no longer wake ~15 seconds after shutdown on Mariko.
- A number of minor issues were fixed and improvements were made, including:
- A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0.
- A workaround was added for a change in 17.0.0 that would cause consoles which had previously re-built their SYSTEM partition to brick on update-to-17.0.0.
- General system stability improvements to enhance the user's experience.
ATTENTION : les sigpatches 17.0.0 pour Atmosphère 1.6.0/1.6.1 ne sont pas encore disponibles et nécessitent un peu plus de travail qu'habituellement. sys-patch ne fonctionne pas non, plus pour l'instant.
Atmosphère 1.6.1 (pre-release)
Github
Source : https://hackintendo.com/atmosphere-1-6-1-pre-release/